Basic HTML Version
BULKPACK
The complete line consists of the carton erector, the filling
head and the box sealer. A metal detector after the box
sealer can be optionally integrated the line.
Full automatic CIP
A cleaning container is just placed at the filling position to
clean the station and the filling head from inside and out-
side. Feed and CIP-return are connected to the system and
all product contact surfaces are full automatically cleaned.
Scale 2 / Fine dosing
Outlet conveyor
Inlet conveyor
Electronic connection Air connection
Foil roll
Scale1
Filling
Free position
Cleaning
feed
Cleaning
return
How does it work?
The conveyor belt carries the erected carton to scale 1 on
which the tare weight of each single carton is measured
before filling. At the following filling position the foil
(if fitted with an integrated foil system) is cut and folded
around the filling head, the filling head drives with the
foil into the carton. The product, e.g. butter is pumped
through the filling pipe into the carton.
The filling head is “floating” on the delivered product and
in consequence of this lifted upwards to a defined position,
supported by adjustable pressurized pneumatic cylinders.
The filling valve is closed and the filling head moves out of
the carton. The filled carton is conveyed to scale 2 through a
free position. The net weight is calculated here (deduction of
the tare weight measured previously). The fine dosing then
automatically adds the difference to the required weight
(set point). A defined quantity of butter is pressed through
a small filling pipe into the carton. An electrical heated wire
cuts the butter in small pieces. Finally the outlet conveyor
belt moves the precisely filled carton out of the unit.